Technical details
Color profile: Generic CMYK printer profile
Composite Default screen
http://www.binatone .com/
51
Standard Digital Enhanced Cordless
Telecommunications (DECT)
Frequency range 1.88 to 1.9 GHz (bandwidth = 20 MHz)
Channel bandwidth 1.728 MHz
Operating range up to 300 m outdoors; up to 50 m
indoors
Operating time
for cordless
handset
standby: 100 hours approx.
talking: hours approx.
battery charge time: 15 hours
Temperature
range
Electrical power
Cordless handset — three AAA-size
Base unit — input 230 V AC, 50 Hz; output DC 7.5 V, 300 mA
Port specification The port (connected to the mains
power supply) is a SELV port with respect to EN41003.
The port (connected to the telephone line) is a TNV
port with respect to EN41003.
PBX compatibilityTimed break recall: programmable as
Pause length: 3 seconds. Signalling type: DTMF (dual-tone
multifrequency), also called tone dialling; or Loop-Disconnect,
Network connection
This equipment is intended to be used in the UK only.
Operation on other countries’ PSTN termination points
cannot be guaranteed.
Charger pod — input 230 V AC, 50 Hz; output
AC 9 V, 300 mA
Short (recommended for most PBX system), Medium or Long.
also called pulse dialling.
Operating 0 ºC to 40 ºC
Storage -20 ºC to 60 ºC
o
o
o
o
i
mAH N rechargeable batteries-
10
online
550 MH
To Next Page
Loading...
