EasyManua.ls Logo

Binatone Terrain 550 - User Manual

Binatone Terrain 550
10 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CALL button
- Press to send
ringing tone to other
PMR units.
(UP)/ (DOWN)
buttons - Press to
change channels,
volume, and to select
settings during
programming.
PTT (PUSH to
TALK) button - Press
and hold to transmit.
Terrain 550
USER GUIDE
Private mobile radio with twin charger
Channel Number. Changes from 1 to 8
as selected by the user.
CTCSS Code. Changes from 1 to 38
as selected by the user.
Displays the Battery charge level. When
the bars are reduced, the battery needs
recharging.
Antenna
PWR (POWER)
button - Press and
hold to turn the unit
ON or OFF.
MIC (Microphone)
Speaker
Ear/Mic/Charge
Jack
Displays when the call signal is ON.
Displayed when the Stop watch function is activated.
Displayed when transmitting a signal.
Displayed when receiving a signal.
Displayed when the Key Lock feature is activated.
Displays the time.
Displays the current Speaker volume level.
Displayed when the Dual Watch function is turned ON.
Displayed when the VOX feature is enabled.
Displays when the PMR is scanning all channels.
1. LCD Screen
LCD Screen
- Displays the
current channel
selection and other
radio symbols.
5HFHLYHU/('
/LJKWVXSZKHQ\RX
DUHUHFHLYLQJVLJQDOV
MENU Button
-Press to change
channels and
sub-channels, and
to switch between
modes.

Table of Contents

Questions and Answers

  • A
    Amanda FerrellAug 13, 2025
    How to change CTCSS sub-channels on Binatone Terrain 550?
    • G
      George MurphyAug 13, 2025
      If you cannot change the CTCSS sub-channels on your Binatone Radio, it might be because the key lock mode is activated (indicated by the Key lock icon on the LCD screen) or the batteries may be weak. To change the CTCSS sub-channels, press the MENU button twice until the CTCSS sub-channel number flashes on the LCD Screen, then press the UP or DOWN button to change the CTCSS sub-channel.
  • O
    Olivia BaileyAug 16, 2025
    Why can't I change CTCSS sub-channels on my Binatone Terrain 550?
    • C
      Christopher LangAug 17, 2025
      If you cannot change the CTCSS sub-channels on your Binatone Radio, the key lock mode may be activated (indicated by the Key lock icon on the LCD Screen), or the batteries may be weak. To change CTCSS sub-channels, press the MENU button twice until the CTCSS sub-channel number flashes on the LCD Screen. Then, press the UP or DOWN button to change the CTCSS sub-channel.
  • D
    Douglas HuffAug 20, 2025
    Why is the range limited on my Binatone Terrain 550?
    • A
      Andrew AyalaAug 20, 2025
      If the range of your Binatone Radio is limited, it could be due to weak batteries or the surrounding environment. If the charge level indicator is low, replace the batteries with new ones. Also, the maximum range depends on the terrain, so try changing the location of the radio.
  • P
    Pamela JensenAug 25, 2025
    How to fix a Binatone Terrain 550 Radio that has no power?
    • C
      Cristian Martinez Jr.Aug 25, 2025
      If your Binatone Radio has no power, the battery may be weak. First, check if the batteries are installed properly. If they are, replace the old batteries with new ones.
  • D
    davenportheatherAug 27, 2025
    What to do if my Binatone Radio has sound distortion problems?
    • H
      Heidi GutierrezAug 27, 2025
      Sound distortion problems with your Binatone Radio may occur if the radios are too close or too far apart, or if obstacles interfere with transmission. When transmitting, speak in a normal tone of voice, about 5 cm away from the microphone. If you are receiving, lower the volume to a comfortable level. Ensure radios are at least 2 meters apart; increasing the distance might help.
  • H
    Heather LinAug 31, 2025
    How to fix weak reception on Binatone Radio?
    • S
      Shannon RodriguezAug 31, 2025
      Weak reception on your Binatone Radio could be due to a weak or out-of-range signal. Try pressing the UP button to increase the receiver volume level. If the issue persists, press the MENU and DOWN buttons simultaneously to activate the Monitor function.
  • L
    Lori WilkinsSep 4, 2025
    How to troubleshoot a Binatone Terrain 550 that has no power?
    • M
      maria78Sep 4, 2025
      If your Binatone Radio has no power, the battery may be weak. Check if the batteries are installed correctly. If they are, replace the old batteries with new ones.
  • T
    Thomas RobertsSep 8, 2025
    What to do if there is no communication with my Binatone Terrain 550 Radio?
    • T
      thomassheilaSep 8, 2025
      If there is no communication with your Binatone Radio, check the Channel and the CTCSS code setting. Both the Transmitting and Receiving PMR units should have tuned to the same Channel and CTCSS code (if applicable).

Summary

Installation Guide

Installing the Battery Pack

Instructions for inserting the rechargeable battery pack into the PMR.

Charging the Battery Pack

Procedures for charging the PMR battery pack using the mains adaptor.

Operation Procedures

Turning the Unit ON;OFF

Guide to powering the PMR unit on and off.

Changing Channels

How to select and switch between the 8 available PMR channels.

Setting the CTCSS Sub-channel

Steps to set up private communication using CTCSS sub-channels.

Transmitting (Sending a Speech)

How to transmit voice using the PTT button.

Setting VOX Sensitivity

Setting the Dual Watch Mode

Activating the Channel Scan

Safety Precautions

Troubleshooting Guide

Binatone Terrain 550 Specifications

General IconGeneral
Maximum range8000 m
Operating frequency446.00625 - 446.09375 MHz
RechargeableYes
Call rings quantity5

Related product manuals