BingoFit 905HR - Restart and Erase Device; Device Reset and Power Off

- 26 -
Some troubleshooting steps may require you to restart
your watch, while erasing it is useful if you want to give
905HR to another person.
Restart and Erase
Press the touch key for 2 seconds in this
screen" ",
[Click the touch key] Go to the next interface: " ".
[Press and hold the touch key for 2s] Start to
reset your device and erase device data.
Press the touch key for 2 seconds in this
screen" ",
[Click the touch key] Go back to the interface: " ".
[Press and hold the touch key for 2s] Turn OFF
the device.