*
Fluid inlet connection:
Fluid outlet connection:
'A'
'B'
AC Induction Electric Motor- EU Model 400V 3PH 3.0 kW @ 50HZ
3.0 kW 4Pole 1400 RPM - Japan Model Rated 20 to 80 Hz (c/w thermisters)
Maximum fluid pressure:E4-60*
Nominal pump stroke: 50mm [1.97 ins]
Pressure when used in 'Smart Mode' (Closed Loop Pressure Mode)
3.0 kW 4Pole 1400 RPM EEx d 11B T3
15 l/m [4.0 US gal/m]
Fluid Output @ 80 HZ [40 cycles/min]
Fluid Output @ 20 HZ [10 cycles/min]
60 l/m [16.0 US gal/m]
2 bar [29 psi]
Reduce Maximum working pressure by 2 bar [29 psi] when using in Open Loop Flow Mode
460V 3PH 1 Hp @ 60HZ
AC Induction Electric Motor - USA Model
SHC 630 Synthetic Oil
Gearbox Oil (EU Model) Synthetic 220 (typically Agip Blasia S)
Gearbox Oil (USA Model)
Rated 20 to 80 Hz (c/w thermisters)
Max. Inlet Pressure
e.g. E4-60 Maximum Set Pressure of 18 bar to operate Pump on a 24/7 basis
NOTE
E4-60 Nominal flow volume / cycle: 1.50 l/m [0.40 US gal/m]
EN
SPECIFICATION
20 bar [290psi]
Gearbox Ratio: 56:1
2"
Sanitary
355kg [737lbs]
Class 1, Group D.
Total Weight of Pump (inc electric motor)
77-3229 R4.1 4/36 www.carlisleft.com
To Next Page
Loading...
