EasyManua.ls Logo

Bintelli NEXUS - Battery Operation

Bintelli NEXUS
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Warning
Before disconnecting or connecting the batteries, the Tow/Run switch must be in the “Tow” position.
Failure to comply with this warning may result in battery failure leading to serious personal injury.
When maintaining the vehicle or batteries, do not wear loose clothing or conductive jewelry such
as rings, watches, and brackets.
Insulated tools need to be used when working near the battery or power connections to prevent
the cart from short-circuiting.
Before working under the cart, make sure the parking brake is on, the cart is switched into the
“Tow” position, and the key is removed from the ignition.
Please keep all signs, warnings, and instructions provided by the manufacturer clear and
untampered.
Battery Operation
The battery pack's power button is located on the Battery Management System module (BMS), Fig. 21.
For 4 seat models equipped with a 105ah battery, the BMS is located on the passenger side of the
battery. To turn the battery on, press the red “on/off” button, Fig. 22. In the on position, the button will be
recessed. After pressing the red “on/off” button, press and hold the green “start” button for a few
seconds. The battery will now supply power to the vehicle. To turn the battery off, push the red “on/off”
button again. In the off position, the button will no longer be recessed.
14

Related product manuals