○ Do not plug in, or unplug the charger while the vehicle’s ignition is on.
○ A dedicated 20 amp circuit is required for battery charging.
○ If the distance to your power source is greater than the length of the included charging cord, only
use a 10 gauge or larger extension cord of no more than 25’.
○ The battery system will charge regardless of whether the battery is on or off.
The battery should be recharged each day and or after the vehicle is used. Lithium batteries do not have
a “memory” and should not be fully discharged before charging.
Lithium Battery Care
Warning
Do not touch or attempt to secure terminal connection until the power is completely shut off to the
vehicle. To disengage power, turn the tow/run switch to “tow”, remove the key, and locate the power
button on the lithium battery and switch it “off”(Power button shown on Figure 3).
The Power switch on the battery must be OFF before any interaction.
Lithium Check:
Cleaning cables and ensuring the surface is free of moisture and debris.
Checking cables and securing connections to Battery.
Recharging batteries.
Monitoring inactivity, long term storage, and colder temperatures.
Although Lithium batteries do not require the same type of routine maintenance as Lead Acid, it is still
strongly recommended to use the proper suggested care to maintain their efficiency. This includes the
Lithium Checklist and more detailed information noted in the user manual.
It’s important to be aware that improper management can void warranties and cause further issues with
the service of your vehicle.
For additional questions and customer support, please contact your local dealer or Bintelli manufacturer.
To Next Page
Loading...
