EasyManua.ls Logo

Bintelli Sprint - Common Faults and Troubleshooting; Fuel system; Air intake;exhaust system

Bintelli Sprint
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Common Faults and Troubleshooting
Fault system
Fault
Causes
Troubleshooting
Fuel system
The engine is unable to be
started.
Fuel not entering the carburetor;
Check fuel lines for blockage
Fuel not flowing from fuel tank;
Check the fuel petcock
The vacuum line fitting leaks;
Replace the vacuum line fitting
The fuel line is blocked;
Replace fuel line
The vacuum hose is blocked.
Replace the vacuum hose
The vehicle is difficult to start
or the fuel is excessively
consumed.
The carburetor is blocked;
Clean or replace the carburetor
Incorrect air/fuel mixture;
Readjust the mixing ratio and concentration of the
carburetor.
The carburetor leaks;
Clean the carburetor or replace the carburetor floater
The fuel filter is blocked;
Clean the fuel filter
The throttle of the carburetor is worn;
Replace the throttle
The fuel is bad;
Replace the fuel.
The air vent of the fuel tank is blocked;
Remove blockage in air vent of the fuel tank
Low fuel
Add fuel to the fuel tank
Air intake/exhaust
system
The vehicle is hard to start
The Air filter element is blocked;
Clean the air filter element
The air filter leaks;
Replace the air filter
The air filter has too much dust;
Clean the air filter element.
The air filter housing leaks;
Repair or change the air filter housing.
Excessive carbon buildup
Clean the carbon buildup
The exhaust port leaks;
Replace cylinder head
The muffler is blocked.
Replace muffler

Related product manuals