To Next PageTo Next PageWhat to do if biodex 950-400 Treadmill Gait Trainer 3 speed control is inoperable?
If the Biodex Treadmill Gait Trainer 3 is turned on but the speed control is inoperable (belt not moving), first check the display for any fault codes. Also, verify that the lanyard is properly attached. For all other faults, contact Biodex Support Services and provide the fault code for further instructions.
General| Model | 950-400 |
|---|---|
| User Weight Capacity | 400 lbs |
| User Weight Capacity (metric) | 181 kg |
| Display | LCD |
| Type | Treadmill |
| Elevation | 0 to 15% |
| Incline Range | 0 to 15% |
| Motor | 3 HP Continuous Duty DC |
Connect the printer cable and attach the safety lanyard as per instructions.
Procedures for installing optional standard or geriatric/pediatric handrails.
Steps to ensure the Gait Trainer deck is level for accurate footfall detection.
Turn on the device and access the main menu.
Enter patient data and parameters for gait training.
Configure audio and visual feedback settings for patient feedback.
View patient progress data using footfall or histogram displays.
Step-by-step guide to initiating and conducting a gait training session.
Available actions on the results screen, including printing and saving data.
Generating and viewing patient progress reports over time.
Initiating a treadmill exercise session quickly with minimal input.
Performing treadmill exercises using manual settings for time, distance, and calories.
Selecting and starting from a list of pre-loaded exercise routines.
Creating and saving personalized treadmill exercise programs.
Adjusting system parameters like screen timeout, brightness, and units.
Managing patient files, records, and data export functions.
Accessing system diagnostics, speed, and elevation calibration procedures.
Routine cleaning and lubrication tasks for daily and quarterly intervals.
Yearly tasks including bed reversal, treadbelt inspection, and lubrication.
