3. Using the Device
This section describes how to get the maximum benefit from your BD216 compact blood pressure monitor.
Follow the instructions carefully to get an accurate measurement of your blood pressure and pulse rate.
Note: Setting the year, month, date and time is one sequential process
3.1 Setting the Year, Date and Time
1. After the AC/DC adapter or batteries are inserted, the year will flash
on the screen. You can set the year by pressing the button. To
confirm the year press the button located on the right side of the
blood pressure monitor.
2. Once the year is confirmed the month and day will appear on the
screen. The month will be flashing, using the button, select your
month and press the button to confirm. Then select the day and
use the button to confirm.
3. Next the time will flash on the screen. Using the same instructions as
above, use the and buttons to set and confirm your time.
4. Once confirmed the date and time will flash on the screen to confirm
your selections.
Note: The time will continuously be displayed on the screen.
3.2 Obtaining Accurate Measurements
Your blood pressure can vary based on numerous factors, physiological conditions, and your surroundings.
Follow these guidelines to obtain accurate and error-free measurements of your blood pressure and pulse rate.
3.2A Tips on Taking Accurate Measurements
In morning before breakfast, 2
hours after dinner, before taking
medication.
Avoid coffee and smoking within the
hour, and no exercise 30 minutes
before measuring.
Do not speak while taking the
measurement.
Sit with legs uncrossed so as not to
restrict blood flow.
Empty bladder (if necessary).
Rest quietly for 5 minutes.
Remain calm and quiet while the
measurement is in process.
Take measurements on the non
dominant arm.
Sit with back supported and
measurement arm resting on a table.
Sit with feet flat on the floor.
Ensure that the cuff is level
with the heart while the arm is
supported on the table.
TIME PM
MONTH-DAY
TIME PM
To Next Page
Loading...
