18
g) You can adjust the level of the arm by putting a
cushion under the arm. Ideally the cuff should be at
heart level.
h) Remain seated in a comfortable room temperature for
at least 5 minutes, then start the measurement.
i) If this device was stored in low temperature, it is necessary to leave it in room temperature for
at least 1 hour, otherwise the measurement can be inaccurate.
Comment:
Continue to use the same arm for comparisons. It is not unusual for there to be a difference in
blood pressure between arms.
Comparable blood pressure measurements always require the same conditions (Relax for several
minutes before taking a measurement).
ATTENTION: Do not use cuffs other than the original cuffs contained in this kit!
MANUAL MODE:
WITH STETHOSCOPE
AUTO MODE:
WITHOUT STETHOSCOPE
g)
To Next Page
Loading...
