Page 3
1. Safety precautions
The following symbols mean:
Caution! Make sure you have fully read and understood the present Manual
before using the equipment. Please pay special attention to
sections marked by this symbol.
GENERAL SAFETY
·Use only as specified in the operating instructions provided.
·The unit should be saved from shocks or falling.
·The unit must be stored and transported in a horizontal position (see package
label).
·After transportation or storage keep the unit under room temperature for 2-3 hrs
before connecting it to the electric circuit.
·Use only cleaning and decontamination methods recommended by the
manufacturer.
·Do not make modifications to the design of the unit.
ELECTRICAL SAFETY
·Connect only to a power supply with voltage corresponding to that on the serial
number label.
·Use only the external power supply unit provided with this product.
·Ensure that the external power supply connector is easily accessible during use.
·Disconnect the unit from the electric circuit before moving.
·Turn off the unit by disconnecting the external power supply from the power
socket.
·If liquid penetrates into the unit, disconnect it from the external power supply unit
and have it checked by a repair and maintenance technician.
DURING OPERATION
·Do not operate the unit in environments with aggressive or explosive chemical
mixtures.
To Next Page
