Biosan Multi Bio RS-24 - Getting Started; Unpacking; Complete Set; Set Up

3. Getting started
3.1. Unpacking.
Remove packing materials carefully and retain them for future shipment
or storage of the unit.
3.2. Complete set.
Package contents:
Standard set
- Multi Bio RS-24 programmable rotator....................................1 piece
- PRS-26 platform u..................................................................1 piece
- External power supply unit ....................................................1 piece
- Operating Manual; Certificate.................................................1 copy
Optional accessories
- PRS-5/12 platform v.......................................................on request
- PRS-10 platform w..........................................................on request
- PRSC-22 platform x........................................................on request
- PRSC-10 platform y........................................................on request
- PRS-1DP platform z.......................................................on request
3.3. Set up:
- place the unit on the horizontal even working surface;
- plug the external power supply unit into the 12 V socket at the rear side
of the unit.
3.4. Platform replacement:
Unscrew the two fixing screws on the platform. Replace the platform and
install the new platform securing it with the screws. Fix the screw tightly.
Page 6