A960D+V2
17
4.2 Software
Installing Software
1. Insert the Setup DVD to the optical drive. The drivers installation program would appear if the
Autorun function has been enabled.
2. Select Software Installation, and then click on the respective software title.
3. Follow the on-screen instructions to complete the installation.
Note1: All the information and content about following software are subject to be changed
without notice. For better performance, the software is being continuously updated.
Note2: The information and pictures described below are for your reference only. The
actual information and settings on board may be slightly different from this manual.
Launching Software
After the installation process, you will see the software icon “eHOT Line” / “BIOS Update”
appears on the desktop. Double-click the icon to launch the utility.
eHot-Line
eHot-Line is a convenient utility that helps you to contact with our Tech-Support system. This
utility will collect the system information which is useful for analyzing the problem you may
have encountered, and then send these information to our tech-support department to help
you fix the problem.
Note: Before you use this utility, please set Outlook Express as your default e-mail client
application program.
This block will show
the information which
would be collected in
the mail.
Provide the e-mail
address that you would
like to send the copy to.
Provide the name of
the power supply
manufacturer and the
model no.
Send the mail out.
Save these information to a .txt fil
Exit this dialog.
Select your area or
the area close to you.
*
Provide the name of
the memory module
manufacturer.
*
Describe condition
of your system.
*
*
represents important
information that you
must provide. Without
this information, you may
not be able to send out
the mail.
To Next Page
Loading...
Need help?
General
