Biostar B150GTN User Manual (English)

Other manuals for Biostar B150GTN

Questions and Answers:

M
Michele ObrienAug 11, 2025
What to do if Biostar B150GTN won't boot from hard drive?
- B
  bandersonAug 11, 2025
  If your Biostar Motherboard doesn't boot from the hard disk but boots from the optical drive, check the cable running from the disk to the disk controller board to ensure both ends are securely plugged in. Also, verify the drive type in the standard CMOS setup. Backing up the hard drive is extremely important, as all hard disks are capable of breaking down at any time.
E
ericksontheresaAug 17, 2025
How to fix Biostar Motherboard not booting after installing second hard drive?
- R
  Robert BenitezAug 17, 2025
  If your Biostar Motherboard system cannot boot after installing a second hard drive, set the master/slave jumpers correctly. Then, run the SETUP program and select the correct drive types. You may also call the drive manufacturers to check for compatibility with other drives.
J
jonathan60Aug 23, 2025
What to do if my Biostar Motherboard shows 'Invalid Configuration'?
- C
  chadandersonAug 23, 2025
  If the screen shows “Invalid Configuration” or “CMOS Failure” on your Biostar Motherboard, review the system’s equipment and make sure the correct information is in the setup.
D
dana35Aug 28, 2025
What to do if Biostar B150GTN is inoperative but lights are on?
- E
  ewalkerAug 29, 2025
  If your Biostar Motherboard system is inoperative but the keyboard lights are on, the power indicator lights are lit, and the hard drives are running, press down firmly on both ends of the DIMM with even pressure until the module snaps into place.
A
acostaelizabethSep 3, 2025
How to troubleshoot no power on Biostar B150GTN Motherboard?
- K
  Kristen KnoxSep 4, 2025
  If there is no power in your Biostar Motherboard system, and the power LED does not shine, and the fan of the power supply does not work, make sure the power cable is securely plugged in. If it is, try replacing the cable.