Biostar GF7050V-M7 SE User Manual

GF7050V-M7 SE
5
CHAPTER 2: HARDWARE INSTALLATION
2.1 INSTALLING CENT RAL PROCESSING UNIT (CPU)
Special Notice:
Remove Pin Cap before installation, and make good preservation
for future use. When the CPU is removed, cover the Pin Cap on the
empty socket to ensure pin legs won’t be damaged.
Pin-Cap
Step 1: Pull the socket locking lever out from the socket and then raise
the lever up to a 90-degree angle.

Biostar GF7050V-M7 SE Specifications

General

Brand	Biostar
Model	GF7050V-M7 SE
Category	Motherboard
Language	English