SMART FAN Control
CPU Smart Fan1/System Smart Fan1
This item allows you to control the CPU/System Smart Fan funcon.
Opons: Disabled (Default) / Auto
Note
The following items appear only when you set the Smart Fan funcon to [Auto].
»
CPU Fan Calibrate
Press [ENTER] to calibrate CPU Fan speed.
Control Mode
This item provides several operaon modes of the fan.
Opons: Quiet / Aggressive / Manual
Fan Ctrl OFF(°C)
When CPU temperature is lower than this value, the CPU fan will keep lowest RPM.
Opons: 10 (°C) (default)
Fan Ctrl On(°C)
When CPU temperature is higher than this value, the CPU fan controller will turn on.
Opons: 20 (°C) (Default)
Fan Ctrl Start Value
This item sets CPU FAN Start Speed Value.
Opons: 50 (Default)
Fan Ctrl Sensive
The bigger the numeral is, the higher the FAN speed is.
Opons: 30 (Default)
To Next Page
Loading...
Need help?
General
