10 | 2. Advanced Menu
Preboot BLE
This item enables or disables Preboot Bluetooth funcon.
Opons: Disabled (Default) / Enabled
Note
»
The following items appear only when you set the Preboot BLE funcon to [Enabled].
BLE Reconnecon Delay
This item Delay prior to connecng BLE host controller. Value between 0-1000ms. Default is
100ms.
Opons: 100 (Default)
WWAN Conguraon
WWAN Device
This item enables or disables M.2 WWAN Device.
Opons: Disabled (Default) / Enabled
Note
»
The following items appear only when you set the WWAN Device funcon to [Enabled].
WWAN Reset Workaround
This item enabling this workardound will result in BIOS asserng FULL_CARD_POWER_OFF#
WWAN signals before the WWAN Device Power-On Sequence is executed. Disabling it has no
impact.
Opons: Enabled (Default) / Disabled