42 | 6. Tweaker Menu
Intel Speed Opmizer (ISO)
This item allows you to sets Intel Speed Opmizer (ISO). When enabled Intel Speed Opmizer
(ISO) feature will automacally overclocks your processor and depends on Board thermal design.
Opons: Supported (Default) / Unsupported
Intel(R) SpeedStep(tm)
This item allows more than two frequency ranges to be supported.
Opons: Enabled (Default) / Disabled
Power Limit 1 Override
This item enables or disables Power Limit 1 Override. If this opon is disabled,BIOS will program
the default values for Power Limit 1 and Power Limit 1 Time Window.
Opons: Disabled (Default) / Enabled
Note
»
The following items appear only when you set the Power Limit 1 Override funcon to [Enabled]
Power Limit 1
This item Power Limit 1 value in Milli Was. BIOS will round to the nearest 1/8W when
programming. 0 = no custom override. For 12.50W, enter 12500.
Opons: 0 (Default)
Power Limit 2 Override
This item enables or disables Power Limit 2 Override. If this opon is disabled, BIOS will program
the default values for Power Limit 2.
Opons: Disabled (Default) / Enabled
Note
»
The following items appear only when you set the Power Limit 2 Override funcon to [Enabled]
Power Limit 2
This item Power Limit 2 value in Milli Was. BIOS will round to the nearest 1/8W when
programming. If the value is 0, BIOS will program this value as 1.25*TDP. For 12.50W, enter 12500.
Processor applies control policies such that the package power does not exceed this limit.
Opons: 0 (Default)
C states
This item enables or disables CPU Power Management. Allows CPU to go to C states when it’s not
100% ulized.
Opons: Enabled (Default) / Disabled
Enhanced C-states
This item enables or disables C1E. When enabled, CPU will switch to minimum speed when all
cores enter C-State.
Opons: Enabled (Default) / Disabled
C-States Auto Demoon
This item sets C-State Auto Demoon.
Opons: C1 (Default) / Disabled
C-States Un-demoon
This item sets C-State Un-demoon.
Opons: C1 (Default) / Disabled