Hi-Fi Z77X
37
Guide of Lucid VIRTU MVP Installation
With Lucid VIRTU MVP solution, the resource and performance of graphics
can be integrated so that user can choose the suitable mode for the
requirement.
System Requirements
CPU: CPU with integrated graphics support
Chipset: Any chipset with integrated graphics output
Discrete GPU: Any Nvidia/AMD GPU with DX9/DX10/DX11
support
Memory Size: 2GB
Operating System: Windows 7/8 32-bit and 64-bit
Hard Disk Space: 20MB
BIOS Setting
Please try to set Onboard VGA (IGD) as first display if you want to use the
i-mode.
i-Mode & d-Mode
1. i-Mode: i-Mode provides user with near zero performance overhead on
3D graphics games, Virtual VSync and Hyperformance
features, integrated GPU special features and power saving
options when no 3D gaming is used. To use Lucid VIRTU
Universal MVP solution in i-Mode, display must be always
connected to motherboard video output.
2. d-Mode: d-Mode is provided for demanding 3D gamers to achieve
uncompromised 3D performance of discrete GPU installed in
the system, along with Virtual VSync and Hyperformance
quality/performance improvement features. In this mode, Virtu
Universal MVP allows user to utilize integrated GPU special
features such as trascoding, while display is connected to
discrete GPU.
Note1: In most cases the differences of 3D performance between i-Mode and d-Mode are
unnoticeable to the user, so it is recommended to use i-mode to save power.
Note2: To use Lucid VIRTU Universal MVP solution in d-Mode, display must be connected to
discrete GPU installed in the system.
To Next Page
Loading...
Need help?
General
