I945P-A7
2
System Memory
Supports dual channel DDR2 up to 8 banks.
Supports DDR2 533 (266MHz) / 667 (333MHz) for a theoretical
maximum bandwidth of 10.7 GB/s.
Supports 256-Mb, 512-Mb, or 1G-Mb DDR technologies for x8
and x16 devices.
Supports non-ECC DIMMs.
Maximum DRAM space is up to 4GB.
DIMM Socket
Location
DDR Module Total Memory Size
DDR2_A1 128MB/256MB/512MB/1GB *1
DDR2_A2 128MB/256MB/512MB/1GB *1
DDR2_B1 128MB/256MB/512MB/1GB *1
DDR2_B2 128MB/256MB/512MB/1GB *1
Max is 4GB.
On Board IDE (IDE1)
One on-board connector supports 2 devices.
Supports PIO Mode 0~4
Supports Ultra DMA 33/66/100 Bus Master Mode.
Extended IDE Controller (optional)
Chip: ITE8211 (without RAID function)
- Supports two extra slots for 4 IDE devices.
ITE8212 (with RAID function)
- Supports two extra slots for 4 IDE devices
- Integrated RAID 0, RAID 1 and RAID 0+1 for
IDE2/IDE3 slot.
IDE2/IDE3 (optional)
Supports up to 4 extra IDE devices.
Supports PIO Mode 0~4
Supports Ultra DMA 33/66/100/133 Bus Master Mode.
Gigabit LAN
Chip: RTL8110S.
Half/Full duplex capability.
Supports 10 Mb/s, 100 Mb/s and 1Gb/s auto-negotiation.
Supports ACPI power management.
To Next Page
Loading...
Need help?
General
