N68S3B BIOS Manual
38
Security
This sub-menu allows you to provide/revise supervisor and user password.
BIOS SETUP UTILITY
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Select Screen
Select Item
Change
General Help
Save and Exit
Exit
Enter
F1
F10
ESC
Install or Change the
password.
Security Settings
Supervisor Password :Not Installed
User Password :Not Installed
Change Supervisor Password
User Access Level [Full Access]
Change User Password
Clear User Password
Password Check [Setup]
Boot Sector Virus Protection [Disabled]
Exit
Change Supervisor Password
Setting the supervisor password will prohibit everyone except the supervisor from
making changes using the CMOS Setup Utility. You will be prompted with to enter a
password.
User Access Level
This item allows supervisor to set the user level.
Options: Full Access (Default) / No Access / View Only / Limited
Change User Password
If the Supervisor Password is not set, then the User Password will function in the
same way as the Supervisor Password. If the Supervisor Password is set and the User
Password is set, the “User” will only be able to view configurations but will not be
able to change them.
Clear User Password
This item is for clearing user password.
Password Check
This item is for setting the timing that checking password.
Options: Setup (Default) / Always
To Next Page
Loading...
Need help?
General
Weight and Dimensions
