Biostar TA790GX A3 PLUS User Manual

Motherboard Manual
30
Notices:
Not all types of AMD CPU perform above overclock setting ideally; the difference will be based on the
selected CPU model.
B. Memory Integration Test (M.I.T.)
This function is under “Overclocking Navigator Engine” item.
MIT allows users to test memory compatibilities, and no extra devices or
software are needed.
Step 1
The default setting under this item is “Disabled”; the condition parameter should
be changed to “Enable” to proceed this test.
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Chipset T-Series
vxx. xx (C)Copyrig ht 1985-200x , American Mega trends, Inc.
Select Screen
Select Item
Change Option
General Help
Sav e and Exit
Exit
+-
F1
F10
ESC
OverClock Navigator [Normal]
GFX Engine Clock Override [Disabled]
=========== Automate OverClock System ===========
============ Manual OverClock System ============
Aut o OverClock Sy stem [V6 -Tech Engine ]
CPU/HT Reference Clock (MHz) [200]
CPU Configuration [Auto]
ATIG Reference Clock (MHz) [100]
SB Re ference Cloc k (MHz) [100]
Spread Spectrum [Disabled]
> G.P.U Phase Control
> CPU FID/VID Control
> Voltage Configuration
> D RAM Timing Configurat ion
> Hyper Transport Configuration
> M emory Conf iguration
> E C Configur ation
Integrated Memory Test [Disabled]
Exit
Op tions
Enabled
Disabled
↓
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Chipset T-Series
vxx. xx (C)Copyrig ht 1985-200x , American Mega trends, Inc.
Select Screen
Select Item
Change Option
General Help
Sav e and Exit
Exit
+-
F1
F10
ESC
=========== Automate OverClock System ===========
============ Manual OverClock System ============
OverClock Navigator [Normal]
Aut o OverClock Sy stem [V6 -Tech Engine ]
CPU/HT Reference Clock (MHz) [200]
CPU Configuration [Auto]
ATIG Reference Clock (MHz) [100]
SB Re ference Cloc k (MHz) [100]
Spread Spectrum [Disabled]
> G.P.U Phase Control
> CPU FID/VID Control
> Voltage Configuration
> D RAM Timing Configurat ion
> Hyper Transport Configuration
> M emory Conf iguration
> E C Configur ation
GFX Engine Clock Override [Disabled]
Integrated Memory Test [Enabled]
Exit
Op tions
Enabled
Disabled
Step 2
Save and Exit from CMOS setup and reboot the system to activate this test.
Run this test for 5 minutes (minimum) to ensure the memory stability.
Step 3
When the process is done, change the setting back from “Enable” to “Disable”
to complete the test.

Biostar TA790GX A3 PLUS Specifications

General

Brand	Biostar
Model	TA790GX A3 PLUS
Category	Motherboard
Language	English