Biostar TP67B PLUS - BIOS - Page 26

TP67B+ UEFI BIOS Manual
25
CPU C1 E
C1E is “Enhanced Halt State” function, this function helps to save power and
decrease heat by lowering CPU frequency while the processor is not working.
Options: Enabled (Default) / Disabled
DDR3 DRAM Multiplier
This item allows you to set DDR3 DRAM Multiplier.
Options: Auto (Default) / 10.67 / 13.33 / 16 / 18.67 / 21.33
DRAM Timing Control
This item allows you to choose to manually or automatically regulate the DRAM
Timing.
Options: By SPD (Default) / Manual / XMP Profile 1 / XMP Profile 2
DRAM Command Rate
This item allows you to select command rate of DDR3.
Options: Auto (Default) / 1T / 2T
CAS# Latency (tCL)
This item allows you to select CAS Latency of DDR3.
Options: 9 (Default) / 3 ~ 15
Row Precharge Time (tRP)
This item allows you to select Row Precharge Time of DDR3.
Options: 9 (Default) / 3 ~ 15
RAS# to CAS# Delay (tRCD)
This item allows you to select Row Address to Column Address Delay of DDR3.
Options: 9 (Default) / 3 ~ 15
RAS# Active Time (tRAS)
This item allows you to select Row Active Time of DDR3.
Options: 24 (Default) / 9 ~ 63