Biostar TP67B PLUS - BIOS - Page 28

TP67B+ UEFI BIOS Manual
27
CPU Request Vcore
This item sets CPU Request Vcore.
Phase Control
This item sets PWM Phase Control method.
Options: CPU Power State (Default) / Full On
PWM W ork Frequency
This item sets PWM Work Frequency.
Options: Auto (Default) / 200 KHz / 185 KHz / 165 KHz / 145 KHz
PWM I-OUT Override
This item enables/disables PWM I-OUT Override.
Options: Disabled (Default) / Enabled
PWM Thermal Override
This item enables/disables PWM Thermal Override.
Options: Disabled (Default) / Enabled
CPU VCore LoadLine
This item sets VCore LoadLine.
Options: Enabled (Default) / Disabled / 87.5% LoadLine / 75.0% LoadLine /
62.5% LoadLine / 50.0% LoadLine / 37.5% LoadLine / 25.0% LoadLine
/ 12.5% LoadLine
CPU PLL
This item sets CPU PLL power supply.
DRAM Voltage
This item sets DRAM Voltage.
Vcc SA
This item sets CPU System Agent (memory controller, DMI, PCIe controllers, and
display engine) power supply.