Biostar TZ75MXE - Setup Prompt Timeout; Bootup Numlock State; Full Screen LOGO Display

TZ77MXE/TZ75MXE UEFI BIOS Manual
27
4 Boot Menu
This menu allo ws you to setup the system boot options.
Setup Prompt Timeout
This item sets number of seconds to wait for setup activation key.
Options: 2 (Default)
Bootup NumLock State
This item selec ts the keybo ard NumLock s tate.
Options: On (Default) / Off
Full Screen LOGO Display
This item allows you to enable/disable Full Screen LOGO Show function.
Options: Enabled (Default) / Disabled
Fast Boot
This item enables or disables boot with initialization of a minimal set of devices
required to launch active boot option.
Options: Disabled (Default) / Enabled