Biostar TZ75MXE - Graphics Core Ratio Limit

TZ77MXE/TZ75MXE UEFI BIOS Manual
33
Graphics Core Ratio Limit
This item sets Graphics Core Ratio Limit.
Options: 20 (Default)
DDR3 DRAM Timing Control
This item allows you to choose to manually or automatic ally regulate the DRAM
Timing.
Options: By SPD (Default) / Manual
DDR3 DRAM Multiplier
This item allows you to set DDR3 DRAM Multiplier.
Optio ns: 13.33 (Default) / 10.67 / 16 / 18.67 / 21.33 / 24 / 26. 67
DDR3 DRAM Command Rate
This item allows you to select command rate of DDR3.
Options: Auto (Default) / 1T / 2T
CAS# Latency (tCL)
This item allows you to select CAS Latency of DDR3.
Opt io ns : 9 ( Def a u lt) / 3 ~ 15
Row Precharge Time (tRP)
This item allows you to select Row Precharge Time of DDR3.
Opt io ns : 9 ( Def a u lt) / 3 ~ 15
RAS# to CAS# Delay (tRCD)
This item allows you to select Row Address to Column Address Delay of DDR3.
Opt io ns : 9 ( Def a u lt) / 3 ~ 15
RAS# Active Time (tRAS)
This item allows you to select Row Active Time of DDR3.
Optio ns: 24 (Default) / 9 ~ 63