Biostar TZ77A - Host Clock Override (1;100 MHz); Enhanced Intel SpeedStep Technology; CPU Turbo Mode

TZ77XE3/TZ75XE3 UEFI BIOS Manual
32
Host Clock Override (1/100 MHz)
This item sets Host Clock Override.
Options: 10000 (Default)
CPU C1E
C1E is “Enhanced Halt State” function, this function helps to save power and
decrease heat b y lo wering CPU frequency while the processor is not working.
Options: Enabled (Default) / Disabled
Enhanced Intel SpeedStep Technology
This item enables /disables Enhanced Intel SpeedStep Technology.
Options: Enabled (Default) / Disabled
CPU Core Current Max (Amp)
This item sets the Max instantaneous current allowed at any given time.
Options: 150 (Default)
Power Limit 1 Value (Watt)
This item sets the power limit value which CPU must not exceed over a specific
time.
Options: 160 (Default)
Power Limit 2 Value (Watt)
This item sets the power limit value which CPU must not exceed over a specific
time.
Options: 180 (Default)
CPU Turbo Mode
This item enables/disables CPU Turbo Mode.
Options: Enabled (Default) / Disabled
iGFX Core Current Max (Amp)
This item sets iGFX Core Current Max.
Options: 35 (Default)