Need help?Do you have a question about the Biotek Synergy LX and is the answer not in the manual?
General| Type | Multi-Mode Microplate Reader |
|---|---|
| Wavelength Range (Absorbance) | 200-999 nm |
| Temperature Control | Yes |
| Shaking | Yes |
| Automation Compatibility | Yes |
| Software | Gen5 Data Analysis Software |
| Detection Modes | Absorbance, Fluorescence, Luminescence |
| Excitation Wavelength Range (Fluorescence) | 250-900 nm |
| Plate Formats | 6- to 384-well plates |
| CO2/O2 Control | Optional |
| Emission Wavelength Range (Fluorescence) | 280-850 nm |
| Dynamic Range (Luminescence) | >6 decades |
| Dimensions | 15.5" W x 16.5" D x 10" H (39.4 cm x 41.9 cm x 25.4 cm) |
| Weight | 35 lbs (15.9 kg) |
Describes the Synergy LX reader models, features, and supported plates.
Lists all items included in the Synergy LX instrument package.
Details available accessories that can be purchased for the Synergy LX.
Provides contact information and required details for technical assistance.
Crucial details regarding shipping hardware, packaging, and inspection.
Step-by-step instructions for unpacking the instrument and its accessories.
Procedure for removing shipping hardware and installing the light-blocking plug.
Instructions for setting up the host computer for Gen5 software control.
Steps for connecting the Synergy LX reader to a host computer.
Instructions for connecting the instrument to a power source.
Procedure for powering on the instrument and running the initial system test.
Steps to start Gen5 software and verify communication with the reader.
Guidelines for properly repackaging the instrument for shipment.
Identification of the instrument's external parts and ports.
Details on filter cubes for fluorescence/luminescence and their configuration.
Guide to navigating and operating the Synergy LX via its touchscreen interface.
Setting essential instrument parameters like time, date, and formats.
Instructions for creating, saving, and managing assay protocols.
Procedure for selecting and running a protocol on the Synergy LX.
Tips and best practices for achieving optimal assay results.
General maintenance guidelines and recommended schedules.
Critical safety warnings and precautions for performing maintenance.
Step-by-step instructions for cleaning instrument surfaces and touchscreen.
Procedures for inspecting, cleaning filters, and replacing the halogen bulb.
Guidelines for decontaminating the instrument, especially for biohazards.
Explanation of Installation, Operational, and Performance Qualification.
Guidance on the recommended frequency for qualification tests.
Procedure for performing the instrument's automated system test.
Methods and procedures for qualifying the absorbance system.
Test procedures using liquid solutions to qualify absorbance performance.
Methods and procedures for qualifying the fluorescence system.
Procedure for qualifying the luminescence system using a Harta plate.
Overall instrument specifications including dimensions, weight, and environment.
Detailed technical specifications for the absorbance measurement system.
Detailed technical specifications for optical measurements.
Example output of the instrument's system test report.
Example report for Absorbance Test Plate qualification.
Example of raw assay data output in CSV format.
Introduction to instrument error codes and basic troubleshooting.
A comprehensive list of error codes and their troubleshooting steps.
General safety statements and multilingual notices.
Detailed warnings covering electrical, service, environmental, and chemical hazards.
To Next Page
