Why does my Biotek Laboratory Equipment report '#N/A' for Min/Max Limit and Result in a higher-OD well?
The measured OD is beyond the specified range for Accuracy or Repeatability used with this test. This does not indicate a test failure.
General| Detection Modes | Absorbance, Fluorescence, Luminescence |
|---|---|
| Software | Gen5 Data Analysis Software |
| Light Source | Xenon Flash Lamp |
| Wavelength Range | 200-999 nm |
| Plate Formats | 6- to 384-well plates |
| Monochromator Bandwidth | 9 nm |
| Temperature Control | Yes |
| Automation Compatibility | Yes |
| Type | Multi-Mode Microplate Reader |
Overview of the Synergy H1's features, modes, and capabilities.
Lists all items included in the Synergy H1 package and their part numbers.
Details available accessories that can be purchased separately for the Synergy H1.
Lists necessary materials and part numbers for performing liquid-based tests.
Information on how to get help and support for the Synergy H1 product.
Contact details and required information for technical support.
Information on how to get assistance with specific scientific applications.
Instructions on how to register your BioTek product for important updates.
Key notes and material requirements for the installation chapter.
Step-by-step guide for safely unpacking and inspecting the instrument.
Procedures for connecting the instrument's power supply.
Step-by-step instructions for installing the dispense module.
How to establish communication between the reader and the host computer.
How to perform a system test to ensure proper operation.
Procedures for safely packing and shipping the instrument.
Explanation of the Synergy H1's modular design and upgrade options.
Overview of the filter cube, its role, and types of filters/mirrors.
Introduction to using Gen5 software for instrument control and analysis.
Steps to configure the Gen5 optics library for installed filter cubes.
Explanation of dispense functions (Prime, Purge) within Gen5.
Tips for achieving the best performance from the Synergy H1.
Detailed description of the filter cube, its sets, and components.
Step-by-step guide for installing a filter cube.
Detailed instructions on how to replace filters or mirrors in a filter cube.
Reference to cleaning instructions in Preventive Maintenance.
Table outlining recommended PM tasks and frequencies.
Essential safety warnings and precautions for maintenance.
Procedure for cleaning the exterior surfaces of the instrument.
Steps for inspecting and cleaning optical filters.
Routine for flushing and purging the fluid path for dispense models.
Routine cleaning of dispense tubes and injectors.
Procedures for decontaminating the instrument, especially before shipping.
Decontamination steps for models without the dispense module.
Decontamination steps for models with the dispense module.
Guide for replacing a faulty syringe in the dispense module.
Step-by-step instructions for installing a new syringe.
Description of the automated system test performed on startup.
Overview of absorbance qualification tests using plates and liquids.
Overview of luminescence qualification tests using the Harta plate.
Overview of fluorescence qualification tests using plates and liquids.
Overview of tests to ensure injection system performance.
Explanation of Installation, Operational, and Performance Qualification.
Procedure for absorbance qualification using test plates.
Procedures for absorbance qualification using liquid tests.
Procedure for luminescence qualification using the Harta plate.
Procedures for fluorescence qualification using liquid tests.
Procedures for testing the injection system.
Overall specifications including microplate compatibility and environmental factors.
Detailed optical and performance specifications for absorbance mode.
Detailed optical and performance specifications for fluorescence modes.
Performance specifications for luminescence detection.
Specifications related to the dispense module's accuracy and precision.
Explanation of how error codes appear in Gen5 and general troubleshooting.
Table listing common error codes and their descriptions/remedies.
To Next Page
