6
Setup
Caution!
To prevent electric shock and damage to the device, make sure the power is switched OFF
on the drum and all related devices before making any connection.
Connecting pads and pedals
Standard: KICK, SNARE, TOM1-3, CRASH, RIDE, HI-HAT and HI-HAT PEDAL.
Using the provided cables to connect with kick pedal, snare, tom1~tom3, ride, crash, hi-hat and hi-hat
pedal. These pads and pedals are all mono input and velocity sensitive.
Note:
For details on assembling the drum stand, attaching the digital drum and connecting pads, refer to the
Setup guide on page 28.
To Next Page
Loading...