BISSELL.ca 5
Getting Ready to Clean
Tools vary by model. To shop all tools and accessories, visit BISSELL.ca/parts.
Attaching the Tool
1. Release the flex hose from
the hose grip bracket latch.
Unwrap completely from
around the machine.
2. Unwind cord and plug into
outlet.
3. Choose your tool and snap
on the end of the hose.
4. Press the power button
beneath the handle to turn it
ON.
Before You Clean
1. Vacuum to remove loose dirt from area to be cleaned.
2. Spray any BISSELL® stain pretreat formula to soiled areas or stains.
3. Allow to sit for at least 3 minutes.
4. Clean following instructions below.
Choose Your Desired Tool
Tools vary by model.
3” and 4” Tools
Great for carpet
stains, furniture and
other hard-to-reach
surfaces.
Pet Stain Tool
Deep injection technology
cleans the carpet from the
bottom up to quickly and
thoroughly remove pet stains.
HydroRinse™ Self-
Cleaning Hose Tool
Use to clean out your
hose after each use.
Stain Trapper Tool
Messes are collected and stored in
a separate, removable container,
keeping pet and other liquid
messes out of your machine.
IMPORTANT: Check the manufacturer’s tag before cleaning upholstery. If manufacturer’s tag is missing or not coded, check with your furniture
dealer. Test a small, hidden area for colourfastness and examine when dry. If colour is a ected do not use. Do not use on silk or velvet.
To Next Page
Loading...
Need help?
General
