EasyManua.ls Logo

Bissell PowerForce Helix Turbo Bagless - Adjusting Height Settings; Using Vacuum Attachments

Bissell PowerForce Helix Turbo Bagless
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Operations
Height Adjustments
Turn knob on Powerfoot to adjust to
one of 5 Height Adjustments. If knob
is dicult to turn, tilt the cleaner back
slightly to take the weight o the foot
while turning.
Lowest Setting: For low pile carpet and
barefloors.
Medium Setting: For medium pile carpet.
Highest Setting: For high pile and most shag
carpet. Adjust to high setting if difficult to push.
Tools
Attach desired tool to hose for cleaning
above oor surfaces.
1. Remove Hose: With vacuum in upright
position, grasp the hose wand to separate
from suction intake opening.
2. Attach tools by firmly pushing onto
vacuum hose or extension wand.
A. Combination dusting brush/
upholstery tool: Rotate for desired
use. Use brush side to dust, blinds,
books, lamps, shelves, and baseboards.
Use upholstery side to for furniture,
drapes and, fabrics.
B. Crevice Tool: Use in tight narrow
spaces.
C. Extension Wand: Use with desired
attachment for longer reach.
D. TurboBrush® Tool (Select Models):
Use rotating brush action for small flat
areas such as stairs, and cushions.
Press down gently and pull towards you
in a raking motion. Too much pressure
will cause the brush to stop rotating.
A
B C
D
1
2

Related product manuals