Bissell QuickSteamer 2080 SERIES - Assembling; How to Use this Guide; Special Features

How To Use This Guide
This User’s Guide has been designed to help you get the
utmost satisfaction from your BISSELL QuickSteamer
Lightweight Deep Cleaner. You’ll find assembly and
operating instructions, safety precautions, as well as
maintenance and troubleshooting instructions. Please read
this Guide thoroughly before assembling your cleaner.
Pay particular attention to the product diagram, assembly
instructions, and part names. Locate and organize all parts
before assembly. Familiarize yourself with the parts and
where they go. Following this User’s Guide will greatly
enhance your ability to get the most performance from
your BISSELL QuickSteamer for many years.
Your QuickSteamer assembles quickly and easily. The
only tool you will need to assemble your deep cleaner is a
Phillips Head ( ) screwdriver.
Your QuickSteamer is packaged with the following items:
Handle Assembly
Upper Body
Lower Body with Collection Tank
Clean/Solution Tank
3 Screws
Slide Upper Body into Lower Body.
Secure with Screws.
Slide Strain Reliever Handle down into Upper Body until it will
go no further.
Secure with Screw.
Place Clean/Solution Tank on back of unit.
Clean/Solution Tank - holds 1/2-gallon of hot water and
cleaning solution.
Collection Tank - holds 1/2-gallon of dirty water.
Power Cord - for storage, wrap Power Cord around Upper
and Lower Cord Wraps, and secure Plug to Cord with
molded clip.
5
1.
2.
How To Assemble
3.
4.
5.
Other Components
1.
2.
3.
4.
5.
ug603-5617_1970-2080_405.indd 5ug603-5617_1970-2080_405.indd 5 8/23/05 8:35:09 AM8/23/05 8:35:09 AM