EasyManua.ls Logo

Bissell QuickSteamer 2080 SERIES - Carpet Cleaning; Hard Floor Cleaning

Bissell QuickSteamer 2080 SERIES
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
With your foot, press the red Power Switch [located in foot
of unit] ON.
With foot, press the Detent Lever on right side of Lower Body.
Depress Spray Trigger to spray cleaning solution.
Do not overwet.
To suction up water, repeat motion over same area without
depressing Trigger.
Repeat Steps 3 and 4 until no more dirt can be removed.
Continue to clean entire carpet, working in 3’ x 4’ sections.
Empty the Collection Tank when dirty water reaches the
full line, or when the Clean/Solution Tank is empty. See
page 8 for instructions.
If Floor Nozzle stops spraying, turn Power Switch OFF and
check water and cleaning solution levels. Refill if needed.
Keep plenty of genuine BISSELL Fiber Cleansing Formula™
on hand so you can clean and protect whenever it fits your
schedule. Always use genuine BISSELL deep cleaning formulas.
48 oz. BISSELL
Fiber Cleansing
Formula
with
Scotchgard
Protector
item # 0710
48 oz. BISSELL
Multi-Allergen
Removal
Formula
with
Scotchgard
Protector
item # 0720
48 oz. BISSELL
Pet Odor and
Soil Removal
Formula
with
Scotchgard
Protector
item # 0730
48 oz. BISSELL
Natural Orange
Extract Formula
with Scotchgard
Protector
item # 0740
WARNING:
To Reduce the Risk of Fire and Electric Shock
due to internal damage, use only BISSELL
cleaning fluids intended for use with the
deep cleaner.
Deep Cleaning
1.
2.
3.
4.
5.
6.
7.
8.
Cleaning Fluid Section
Keep plenty of genuine BISSELL Fiber Cleansing Formula
on hand so you can clean and protect whenever it fits your
schedule. Always use genuine BISSELL deep cleaning
formulas. Non-BISSELL cleaning solutions may harm the
machine and void the warranty.
Tip:
It is recommended
that every time your
Clean/Solution Tank is
emptied of solution that
you empty the contents
of the Collection Tank. If
the Collection Tank gets
too full, you may begin
to see foam
spitting out of the vent
cover. When this
happens you will know
it is time to empty the
Collection Tank.
ug603-5617_1970-2080_405.indd 7ug603-5617_1970-2080_405.indd 7 8/23/05 8:35:11 AM8/23/05 8:35:11 AM

Related product manuals