EasyManua.ls Logo

Bissell QuickSteamer 2080 SERIES - Fill Tank; Pre-Treating

Bissell QuickSteamer 2080 SERIES
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Plan activities to give carpet time to dry.
Remove easily moved furniture (chairs, lamps,
coffee/cocktail tables, etc.) from room if needed.
Vacuum carpet thoroughly.
Decide where to begin — and end — your job. Clean in 3’ X 4’
sections, starting in areas farthest from exit. Plan to leave a path
open to empty soiled water and refill cleaner.
Carpeting will dry in three to four hours, depending on carpet
style and air circulation in room. A floor fan speeds drying.
Replace furniture on damp carpeting by placing waxed
paper under legs until floor dries completely.
Remove the Clean/Solution Tank by lifting it straight up,
then away from the Lower Body.
Unscrew the black cap at the bottom of the
Clean/Solution Tank.
Add one of the BISSELL Advanced Cleaning formulas for
Deep Cleaning machines to the formula fill line on the
Clean/Solution tank. Fill the rest of the tank with hot (not
boiling) tap water to the water fill line. Replace and tighten
the black cap.
Place Clean/Solution Tank on Lower Body.
Rotate Quick Release Cord Wrap™ to release the Power
Cord and plug into an outlet.
Pre-treat stubborn stains and highly soiled carpet in
hallways and other high-traffic areas.
Using BISSELL Tough Stain pre-cleaner, generously spray
evenly over soiled area, do not overwet carpet.
Wait 3 -5 minutes before deep cleaning.
Pre-Treating
2.
1.
2.
1.
2.
3.
4.
6.
5.
5.
Tip:
Always vacuum thoroughly
before you deep clean. If pos-
sible, move large furniture to an
area you will not be cleaning.
How To Use Your BISSELL QuickSteamer
How To Begin
Getting Ready
1.
3.
4.
WARNING:
To reduce the risk of
fire, use only BISSELL
Cleaning Formulas
for Deep Cleaning
Machines. Use of
cleaning formulas that
contain lemon or pine
oil may damage this
appliance and void
warranty. Chemical spot
cleaners or solvent-
based soil removers
should not be used.
These products may
react with the plastic
materials used in your
QuickSteamer, causing
cracking or pitting.
Tip:
Deep cleaning
spots, spills
and high traffic
areas on a
regular basis can
prolong
carpet life.
2.
ug603-5617_1970-2080_405.indd 6ug603-5617_1970-2080_405.indd 6 8/23/05 8:35:10 AM8/23/05 8:35:10 AM

Related product manuals