Bistos BT-400 User Manual

BT-400 Operation Manual 10
P/N: 400-ENG-OPM-EUR-R09
Bistos Co., Ltd.
2018,03
2.6 Appearance of BT-400
The BT-400 phototherapy system includes the components shown in the following figure.
2.6.1 Description of Each Part of BT-400
Fig1. Main body and Roll Stand
① Light Source: The light can be adjusted both horizontally and vertically on the roll
stand assembly to desiring angle.
To remove the light from the roll stand, loosen the knob and lift the light source
assembly up and away from the roll stand.
② Adjustable Neck
③ Control Box (Power Assembly): It contains power switch, key button and LCD
displays. Especially, LCD window shows operating hours, status and information.
④ Height Adjustment Knob: The knob allows you to adjust the height of the light source.
First loosen the knob, then adjust the height of the light, and finally tighten the knob to
lock the height.
⑤ Roll Stand (Optional)
Warning!
When you use roll stand, please fix it by using the locking device that is attached
to casters. Otherwise, personal injury or equipment damage could occur.

Bistos BT-400 Specifications

General

Brand	Bistos
Model	BT-400
Category	Medical Equipment
Language	English