Bistos BT-400 - BT-400 Environmental Precautions

BT-400 Operation Manual 6
P/N: 400-ENG-OPM-EUR-R09
Bistos Co., Ltd.
2018,03
1.3 General precaution on environment
Do not keep or operate the equipment under the environment listed below.
Avoid placing in an
area exposed to
moisture. Do not touch
the equipment with
wet hand.
Avoid exposure to
direct sunlight
Avoid placing in an
area where there is a
high variation of
temperature.
Operating temperature
ranges from 10°C to
40°C. Operating
humidity ranges from
5% to 85%.
Avoid in the vicinity
of Electric heater
Avoid placing in an
area where there is an
excessive humidity rise
or ventilation problem.
Avoid placing in an
area where there is
an excessive shock
or vibration.
Avoid placing in an
area where chemicals
are stored or where
there is in danger of
gas leakage.
Avoid dust and
especially metal
material into the
equipment.
Do not disjoint or
disassemble the
equipment.
BISTOS Co., Ltd. does
not take responsibility
of it.
Power off when the
equipment is not fully
installed.
Otherwise, the
equipment could be
damaged.