BT-400 Operation Manual 5
Photoisomers: Bilirubin Photoisomers may cause toxic effects.
Water balance: Some patients’ water balance may be disturbed.
The unit can be tumbled at surface inclined more than 10 degrees.
Photosensitive Drugs: The light generated can degrade photosensitive medications. Do
not place or store any drugs near or in the illuminated area.
Combustion gases: Do not use the light in the presence of gases that support combustion
(for example, oxygen, nitrous oxide, or other anesthetic agents).
Disconnect electrical power: Always switch off the power and disconnect the power cord
when cleaning the light.
Do not use flammable solution directly to the LED lamps. It may cause of degradation or
on the LED lamps. For cleaning or maintenance, please follow the instruction
described in Section 6 of this manual.
Incorrect use of the LED, or the use of parts and accessories that are not manufactured of
supplied by Bistos Co., Ltd can
damage the light, and may cause injury to the patient
and/or user.
When attaching light to any floor stand, other than Bistos Roll Stand, confirm weight
capacity of stand.
To Next Page
Loading...
Need help?
General
