3. Installation & Usage
3-1 Battery Installation
1) Insert the battery in the bottom of the
printer, and ensure that you align the
battery hook properly.
2) Push the battery into the slot until you hear
it snap in place.
Since the battery is partially changed at the time
of purchase, charge the battery prior to product
use. (Use the battery charger or the optional
Single battery cradle/Quad battery charger.)
3-2 Battery Charging
3-2-1 Using Battery Charger
1) Turn off the printer power.
2) Connect the power cord ② to the battery
charger ①, and then connect AC power.
3) Open the external interface cap in the
direction of ③.
4) Connect the battery charger to the power
connector.
The printer may incur serious damage if the
battery charger provided by BIXOLON is not
used. BIXOLON is not legally liable for any such
damages. (The voltage and electrical current
specifications of the printer and battery charger
must match.)
WARNING
Turn off the power before charging the battery for
the printer.
To Next Page
Loading...
Need help?
General
