6. Peripherals Connection
This product can communicate with other devices via Bluetooth, Wireless LAN
communication and cable.
6-1 Bluetooth & Wireless LAN Connection
1) The printer can be connected to devices
equipped with Bluetooth communication
capacity (PDAs, PCs, etc.).
2) Use the Bluetooth connection function
supported by the device to connect to the
printer.
The NFC tag built into the printer enables
automatic pairing with devices.
Tap your host device to logo on the side of
the printer for NFC auto pairing.
The device must support NFC Auto Pairing.
It may display a message that the device
cannot be connected as NFC Auto Pairing
is supported up to the B/T pairing and the
devices must be connected manually, but
this is normal.
3) The printer can be connected to other
stations, such as PDAs and PCs
supporting wireless LAN communication
in Ad-hoc mode, Soft AP mode and AP
in Infrastructure mode.
Refer to the Bluetooth Wireless LAN
Manual for detailed information on its
connection.
You can check the bluetooth environment
(authentication, encryption, connection
mode) and the wireless LAN environment
(IP, SSID, authentication, encryption) via
the self-test page.