EasyManuals Logo

BIXOLON SPP-R410 User Manual

BIXOLON SPP-R410
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Rev. 1.00
- 7 -
SPP-R410
10. Do not pierce the battery with a pointed object, such as nail or awl, or strike with a
heavy object, such as a hammer, and take care not to step on the battery. There is a
potential risk of battery overheating, combustion, and/or explosion caused by an
internal short circuit.
11. Do not solder the battery directly. Doing so may melt the insulating materials and/or
damage the safety mechanism or safety equipment, resulting in battery overheating,
combustion, and/or explosion.
12. Do not disassemble and/or modify the battery. The battery contains safety equipment
and a safety mechanism to prevent danger. There is a potential risk of overheating,
combustion, and/or explosion caused by disassembly.
13. Do not charge the battery near open flames and/or under direct sunlight. Because
exposure to high temperatures triggers the operation of the safety mechanism, the
battery may not charge or may overcharge due to destruction of the safety mechanism.
There is a potential risk of overheating, combustion, and/or explosion.
14. Do not expose the battery to high temperatures over 60
o
C, and do not use or store it in
a hot or humid place.
15. Do not use the battery if it is damaged or the exterior is deformed due to external
shock or if it is swollen.
Warning
1. Do not place the battery within the reach of small children to prevent any swallowing
accidents. If a small child has swallowed the battery, consult a physician immediately.
2. Do not place the battery in a microwave oven and/or high voltage appliance. Doing so
can cause rapid overheating and/or destruction of the sealing, resulting in battery
overheating, combustion, and/or explosion.
3. Do not combine and use any battery of different capacity and/or type with the primary
battery. Doing so can cause excessive electrical discharge during use or excessive
charging during charging, resulting in an abnormal chemical reaction within the battery
that can cause battery overheating, combustion, and/or explosion.
4. If during battery usage, storage, or charging, a strange odor or conditions differing from
the normal, such as overheating, color changes, warping, etc., are detected, remove the
battery from the product or charger and discontinue use. Continued use may cause
battery overheating, combustion, and/or explosion.
5. When recharging, if the battery is not charged after the normal fixed charging time,
discontinue charging. Continued charging can result in battery overheating, combustion,
and/or explosion.
6. If the battery appears to be coated with condensation or emits a strange odor,
immediately place it far away from any heat source. The condensation may be caused
by a leak of electrolytic solution that can ignite to cause battery combustion and/or
explosion.
7. If the battery is leaking electrolytic solution and any of the solution enters the eyes,
immediately wash out with clean water, and then consult a physician to receive
treatment. Neglecting to do so can cause permanent eye injuries.

Other manuals for BIXOLON SPP-R410

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BIXOLON SPP-R410 and is the answer not in the manual?

BIXOLON SPP-R410 Specifications

General IconGeneral
TypeMobile printer
Print technologyDirect thermal
Maximum resolution203 x 203 DPI
Product colorBlack
Maximum roll diameter57 mm
Supported paper width112 mm
Maximum printing width104 mm
Printing media thickness57 µm
Battery voltage7.4 V
Battery recharge time4 h
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)-15 - 50 °C
Operating relative humidity (H-H)10 - 80 %
Linear (1D) barcodes supportedCodabar, Code 128, Code 39, Code 93, EAN-13, EAN-8, U.P.C.
Cables includedAC
Quick start guideYes
Ethernet LANNo
Standard interfacesSerial, USB 2.0
Serial ports quantity1
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technologyWired & Wireless
Harmonized System (HS) code84433210
Weight and Dimensions IconWeight and Dimensions
Depth138 mm
Width143 mm
Height66 mm
Weight242 g

Related product manuals