BIXOLON SRP-270 Reference Guide

POS/Mobile Printer
Rev. 1.00
- 49 -
3-37 ScrCheckStatus
Check the smart card status. This function is only available on SPP-R210 SCR.
long ScrCheckStatus (char *status, char *pResponse);
[Parameters]
* char *status
[in, out] Smart card status data
* char *pResponse
[in, out] Response to the command
[Return Values]
Constant
Value
Description
SUCCESS
0
The function is successful.
WRITE_ERROR
-105
Data transmission failed.
NOT_SUPPORT
-124
The function is not supported.
SCR_RESPONSE_ERROR
-126
The response data is incorrect.
* Example
int ret;
char response = 0xff;
char status = 0x00;
ConnectToPrinter(………..);
……
ret = ScrCheckStatus(&status, &response);
if (0x00 != response)
return;
……

BIXOLON SRP-270 Specifications

General

Color	No
Maximum print size	-
Media thickness	76 mm
Print technology	Dot matrix
Power requirements	120-230VAC
Standard interfaces	Parallel, Serial