3. Usage Preparation
1) Printer and PC Connection.
Connect the printer and PC via the interface cable.
(The interfaces available for usage are Serial, Parallel, USB and Ethernet.)
2) Unified POS Utility Program Execution.
The program can be installed from the accompanying CD, and Latest file versions can
be downloaded from the BIXOLON website. (http://www.bixolon.com)
3) Select the interface type and communication conditions.
4) Click on the “Connect” Button. If the conection is successful, the inactive buttons
become active with the message “The printer is connected”.
If the connection fails, the following error message appears. “Cannot open port”.
To Next Page
Loading...
Need help?
General
