What to do if Bizerba SC II 500 Scales display 'The PLU has not been defined.'?
If your Bizerba Scales display 'The PLU has not been defined.' when defining ranges, it means the selected PLU has not been defined. Enter the correct PLU no. or create the product.
How to fix 'Printer not set correctly!' error on Bizerba SC II 500 Scales?
If your Bizerba Scales display 'Printer not set correctly! Switch device on/off, continue with key', it means adjustment has not been correctly performed during the self-adjustment process on the printer, possibly due to no paper being inserted or the end of paper during adjustment. After switching off and on, the adjustment process is automatically repeated.
What to do if Bizerba SC II 500 Scales display 'EDP connection not available !'?
If your Bizerba Scales display 'EDP connection not available !' during continuous ticket call by EDP, check the connection cable from the SC II to the PC and verify the PC connection.
What does 'Incorrect check digit' mean on Bizerba SC II 500?
If your Bizerba Scales display 'Incorrect check digit' when scanning a PLU, check the barcode print format for dot omissions. If the EAN no. was entered manually via the keyboard, check the entry.
What does 'Incorrect price group!' mean on Bizerba SC II 500?
If your Bizerba Scales display 'Incorrect price group!', it means a second price group is being used within a ticket that has been opened with a defined price group, which is not allowed. Another price group cannot be selected within a ticket. Conclude the ticket and process a new ticket with the corresponding price group.
What does 'Incorrect range type, delete range' mean on Bizerba SC II 500 Scales?
If your Bizerba Scales display 'Incorrect range type, delete range' when defining ranges/sets of PLUs, it means the applied number has already been assigned by a range or PLU set. Select a free number.
What to do if Bizerba SC II 500 display 'Wrong password'?
If your Bizerba Scales display 'Wrong password' during operator log on/log off, the password used is incorrect. Enter the correct password. The password can be read out in 'Data maintenance' / 'Operator data' under the relevant operator number.
What does 'Error in encoding' mean on Bizerba SC II 500 Scales?
If your Bizerba Scales display 'Error in encoding' when printing barcodes, check in 'Data maintenance' in the 'Barcode data' menu to ensure that the settings for the applied barcode are correct.
What to do if Bizerba Scales display 'Error accessing the cash drawer'?
If your Bizerba Scales display 'Error accessing the cash drawer', and the cash drawer does not open, with the read-back contact not detected, check the connector for the SC II cash drawer.
What does 'Zero setting error' mean on Bizerba Scales?
If your Bizerba Scales display 'Zero setting error' during sales, it means there is an error in the automatic zero point control, and the scale is above the country-specific permissible automatic zero setting range. Clean the load plate, position it correctly, and remove any objects. If the problem persists, switch the scale off and on.
Classification of warnings by danger level (DANGER, WARNING, CAUTION, NOTICE).
Details on verification requirements and metrology marks for EU and non-EU countries.
Notes on temperature, humidity, installation surface, and personnel.
Requirements for power supply installation and interference suppression.
Identifies hazards related to power supply, voltage, and device openings.
Specifies the need for trained personnel and understanding of safety instructions.
Procedure for leveling the scale using foot screws and a spirit level.
Instructions for connecting cables, including safety precautions.
Explanation of basic and extended keyboard functions and configuration.
Steps to turn on the scale and initial display behavior.
Details on SC II 100 K/B operation, especially differences from standard scales.
Methods for calling up articles (PLU) via direct or indirect procedures.
Steps following a PLU call-up, including registration and unit price input.
Manual entry of weight for 'Weighed' product types.
Procedures for canceling articles before total completion.
Weighing and taring non-article-related tare values.
Methods for entering known tare values and rounding rules.
Recording and printing traceability information for articles like meat.
Operating mode for self-service sales, including label printing.
Using the device as a cash register, including pay-in/pay-out.
Overview of various price types like graduated price and N/C.
Ensuring piece count is entered for piece-price articles.
Handling articles with fixed weight and price, including various PLU types.
Configuration and operation for 'Manual-weighed' PLU type.
Configuration and operation for 'By-count weighed' PLU type.
Configuration and operation for 'Manual fixed weight' PLU type.
Configuration and operation for 'By-count fixed weight' PLU type.
Handling piece articles with saved quantities and flexible pricing.
Table of common faults, their causes, and elimination steps.
List of text messages, causes, and remedies for scale errors.
Safety and procedure for cleaning the main device unit.
Instructions for cleaning the printer, including thermal strip and rollers.
To Next Page
General
