What does 'Apply weight' mean on Bizerba SC II 500 Scales?
If your Bizerba Scales display 'Apply weight' during sales, registration is only performed for a weight-dependent PLU after a load change.
How to fix Bizerba SC II 500 Scales display if it does not illuminate?
If the display of your Bizerba Scales does not illuminate, the issue might be due to a lack of supply voltage or incorrect display settings. First, ensure the power cable is properly connected and the mains switch is turned on. If the display remains dark, reset the display settings by confirming the key sequence: +.
Why is my Bizerba Scales printer not printing?
If your Bizerba Scales printer won't print, it might be because the print bar is open. Make sure to close the print bar correctly.
What does 'Customer no. is already used by Operator: XXX' mean on Bizerba SC II 500?
If your Bizerba Scales display 'Customer no. is already used by Operator: XXX' during sales during overlapping service with customer/operator link, the customer no. is occupied by another operator. Undo the customer/operator link.
What does 'Unbuffered heap is too highly fragmented' mean on Bizerba Scales?
If your Bizerba Scales display 'Unbuffered heap is too highly fragmented' in conjunction with multi-line text editors, the text editor cannot be created in the unbuffered RAM area. Switch the SC II off and on to delete and redefine the unbuffered area.
What does 'No ticket data existing' mean on Bizerba SC II 500 Scales?
If your Bizerba Scales display 'No ticket data existing' during sales when entering the ticket no. with the 'Enter ticket no.' key, check that the entered ticket no. is correct and re-enter it.
What does 'Incorrect check digit' mean on Bizerba SC II 500?
If your Bizerba Scales display 'Incorrect check digit' when scanning a PLU, check the barcode print format for dot omissions. If the EAN no. was entered manually via the keyboard, check the entry.
What does 'Operator invalid' mean on Bizerba Scales?
If your Bizerba Scales display 'Operator invalid' during sales, the SC II is set in 'Configuration' / 'Device settings' such that multiple operation is not permitted. If an operator has started a ticket at a device, the next operator cannot begin until the first operator has pressed 'Total'.
What does 'Seasonal PLU locked' mean on Bizerba Scales?
If your Bizerba Scales display 'Seasonal PLU locked' when a PLU is opened, switch off the menu item 'PLU locked' in the menu 'PLU maintenance' / 'Other'.
What to do if Bizerba Scales say 'Please press key'?
If your Bizerba Scales display 'Please press key' when self-service mode is activated, press the button.
Classification of warnings by danger level (DANGER, WARNING, CAUTION, NOTICE).
Details on verification requirements and metrology marks for EU and non-EU countries.
Notes on temperature, humidity, installation surface, and personnel.
Requirements for power supply installation and interference suppression.
Identifies hazards related to power supply, voltage, and device openings.
Specifies the need for trained personnel and understanding of safety instructions.
Procedure for leveling the scale using foot screws and a spirit level.
Instructions for connecting cables, including safety precautions.
Explanation of basic and extended keyboard functions and configuration.
Steps to turn on the scale and initial display behavior.
Details on SC II 100 K/B operation, especially differences from standard scales.
Methods for calling up articles (PLU) via direct or indirect procedures.
Steps following a PLU call-up, including registration and unit price input.
Manual entry of weight for 'Weighed' product types.
Procedures for canceling articles before total completion.
Weighing and taring non-article-related tare values.
Methods for entering known tare values and rounding rules.
Recording and printing traceability information for articles like meat.
Operating mode for self-service sales, including label printing.
Using the device as a cash register, including pay-in/pay-out.
Overview of various price types like graduated price and N/C.
Ensuring piece count is entered for piece-price articles.
Handling articles with fixed weight and price, including various PLU types.
Configuration and operation for 'Manual-weighed' PLU type.
Configuration and operation for 'By-count weighed' PLU type.
Configuration and operation for 'Manual fixed weight' PLU type.
Configuration and operation for 'By-count fixed weight' PLU type.
Handling piece articles with saved quantities and flexible pricing.
Table of common faults, their causes, and elimination steps.
List of text messages, causes, and remedies for scale errors.
Safety and procedure for cleaning the main device unit.
Instructions for cleaning the printer, including thermal strip and rollers.
To Next Page
General
