Bizerba CS 300 MA 94 User Manual (English)

Questions and Answers:

R
Rachel CastilloAug 7, 2025
Why is the weight display not on zero or changing on my Bizerba CS 300 MA 94 Scales?
- E
  Erika FullerAug 7, 2025
  If the weight display on your Bizerba Scales is not on zero or is changing, it could be due to several reasons. First, check the load plate. Make sure it is clean, correctly positioned, and free of any objects. Secondly, ensure that there is no soiling on or beneath the load plate, clean it if necessary. Finally, verify that the scale is leveled properly; if not, level the scale and then switch it off and on.
E
Elizabeth PetersonAug 12, 2025
How to fix a Bizerba CS 300 MA 94 display that does not illuminate?
- J
  James BrewerAug 12, 2025
  If the display of your Bizerba Scales does not illuminate, the most likely cause is a lack of supply voltage. To resolve this, check the mains/power supply cable and ensure it is properly plugged in.
J
Jill BrownAug 17, 2025
What to do if Bizerba CS 300 MA 94 Scales shows zeropoint monitoring error?
- J
  jwrightAug 17, 2025
  If your Bizerba Scales shows a zeropoint monitoring error because the load was not removed for more than 2 minutes, the solution is to unload the scales.
B
brianrobinsonAug 22, 2025
What to do if my Bizerba Scales displays Cod 110 (scale loaded during start-up)?
- Y
  yguzmanAug 22, 2025
  If your Bizerba Scales shows the error code Cod 110 (scale loaded during start-up), it means that the scale was loaded during the start-up process. To fix this, unload the scales.
C
cburnsAug 27, 2025
What causes Cod 112 error on Bizerba Scales?
- H
  Hector BarnettAug 27, 2025
  If your Bizerba Scales shows the error code Cod 112, it indicates movement of the scale during start-up. To resolve this, ensure that you do not move the scale during start-up.
K
Karen SmithSep 1, 2025
What to do when Bizerba Scales shows other error code digits?
- J
  josephmendezSep 1, 2025
  To address other error code digits on the Bizerba Scales, press key .