Bizerba CS 300 User Manual

CS 300
Checkout Scale
Operating instructions
as of program version 4.42
6.110.98.5.01.40 en

Bizerba CS 300 Specifications

General

Brand	Bizerba
Model	CS 300
Category	Scales
Language	English

Summary

About these instructions

Safe-keeping

Instructions must be kept next to the device and easily accessible for all personnel.

Target group

Device operation is restricted to trained personnel familiar with these operating instructions.

Additional applicable documents

Refers to the declaration of conformity for scale/cash register systems.

Symbols used

Explains icons and symbols used in the manual for clarity and better understanding.

Warnings

Details danger levels, consequences, and avoidance measures for DANGER, WARNING, and CAUTION signals.

About the device

Device types

Describes various CS models available for different installation situations at POS workstations.

Accessories

Bizerba offers a wide range of accessories for this device.

Intended use

The CS cash register scale is designed for checkout operations in conjunction with a POS system.

Identification plate

Provides an example of an identification plate of a verified scale with EC type approval.

Verification-related notes

Notes regarding scales used in Germany and metrological/verification info for EC countries.

Standards and guidelines

Lists relevant measuring technology, EMC, and electrical safety standards and guidelines.

Operating conditions

Details temperature, humidity, installation surface, draft, air convection, and power supply requirements.

Warranty

Details warranty terms, Bizerba's non-responsibility for damages, and conditions for warranty lapse.

Disposal of devices/environmental protection

Information on returning and disposing of used batteries and devices in Germany.

Safety instructions

Requirements for operating personnel

States that only trained personnel familiar with instructions should operate the equipment.

System-related sources of hazards

Identifies hazards like incorrect supply voltage and energized switched-off devices.

Plates on the device

Describes plates on the device, including power plug warning and SD adhesive mark.

Installation

Transport and storage

Instructions for always transporting and storing the device in its original packaging.

Installation and assembly

Details the process of installing the weighing system in the scanner and POS counter.

Start-up

Covers putting the device into operation and initial training.

Decommissioning

Steps to take when placing the scale out of operation for a long period.

Mounting the device

Instructions for unpacking and lifting the device carefully out of packaging.

Setting overload stop

Describes how to set the overload stop for the weighing system.

Device and operating controls

Display

Explains the display layout, symbols, and different display areas.

CS 300 SD (Software Display)

Explains the CS 300 SD module for displaying scale data on a POS screen.

Keyboard

Overview of function keys and keyboard designs.

CS 300 with POSscale (RIK4Checkout)

Describes the POSscale software and its operation with the CS 300.

Operation

Switching device on

Instructions for turning the scale on and the resulting display test.

Switching off device

Procedure for turning the scale off.

Resetting the device

Explains automatic reset and manual reset to zero.

Tare functions

Explains tare balancing for unknown tare values.

Programming

Key functions in programming mode

Explains keys used for navigation and confirmation in programming mode.

Calling up a menu

Describes how to access the programming menu during the display test.

Menu Pr2--

Lists available parameters like Checkout dialog, POS/scale display switching, zeropoint monitoring.

Menu Pr 4--

Covers 0-LED on scanner and setting display type.

Menu Pr 7--

Includes switching fine resolution display, displaying load cell type, and logbook control.

Overview of programming

Summarizes programming options, display examples, menu, and page references.

Troubleshooting

Fault description

Lists common faults, their causes, and elimination methods.

Messages

Explains how operating errors are indicated by 'Cod' and error codes.

Maintenance

Cleaning

Provides instructions on cleaning the device and removing dirt from beneath the load plate.

Servicing

Covers cleaning intervals and testing the weight display.

Technical data

Dimensions

Lists dimensions for CS 300 TM, TE, and ER-K models.

Dimensions of CS displays

Provides dimensions for P and WS displays on stands and with angles.

Power supply

Details mains supply voltage, frequency, and plug-in transformer unit specifications.

Ambient conditions

Specifies requirements for electronic retail scales and related systems.

Appendix

Declaration of conformity CS 300

Official statement confirming the design of the non-automatic scales meets requirements.