Operating instructions CS 300 Troubleshooting
6.110.98.5.01.40 en 8 - 1
8
8 Troubleshooting
The following table lists the most common problems along with their solutions and assists
you to solve problems you may encounter by trying the suggested remedies.
In the case of errors which you cannot eliminate yourself and which are not described in
these operating instructions, please call your Bizerba customer service point.
Please provide your Bizerba customer service point with the following details:
–
Device type (see identification plate)
– Device no. (see identification plate)
– Error description
This will facilitate preparations by customer service staff.
8.1 Fault description
Fault Cause Elimination
Display does not il-
luminate.
No supply voltage Check the mains/ power supply
cable and plug it in.
Weight display not
on zero or chang-
ing.
Load plate not correctly posi-
tioned or objects located on the
load plate.
Soiling on or beneath the load
plate.
Clean load plate, position cor-
rectly and remove objects.
Scale not leveled. Level scale.
Switch scale off/on.
8.2 Messages
Operating errors or faults in the electronic system are indicated by "Cod" and an error
code.
To Next Page
Loading...
