Troubleshooting Operating instructions CS 300
8 - 2 6.110.98.5.01.40 en
8
Fig. 99: Display
Messages Cause Elimination
Cod 112 Movement of the scale during start-up. Do not move the scale!
Cod 110 Scale loaded during start-up. Unload scales!
Cod 110 Scale below zero during start-up. Apply load platter.
Other error code digits ----- Press key <0>.
(only with VGA dis-
play)
Zeropoint monitoring
Load was not removed from scale for
more than 2 minutes.
Unload scales!
To Next Page
Loading...
