Operating instructions CS 300 Operation
6.110.98.5.01.40 en 6 - 1
6
6 Operation
6.1 Switching device on
The scales should not be loaded.
Fig. 74: Display test
Press key <0> once.
The display test occurs automatically. It
causes the figure 8 and the symbols to
appear at all digit places for approx. 5
seconds.
With a VGA display a checkered pattern
is displayed for approx. 5 seconds.
After that the weight display is automati-
cally set to "0.000" kg provided that the
scale is unloaded.
6.2 Switching off device
Fig. 75: Weight display
Press key <0> twice.
The display switches off automatically af-
ter a short time.
6.3 Resetting the device
After switching on the scale the weight display is automatically set to "0.000" kg provided
that the scale is unloaded.
The scale has an automatic reset device, so that minor zero point changes are compensa-
ted automatically.
To Next Page
Loading...
